Functions
IMPORTGOBI ULONG GOBICMAPI	SetPowerCallback (tFNPower pCallback)

IMPORTGOBI ULONG GOBICMAPI	SetActivationStatusCallback (tFNActivationStatus pCallback)

IMPORTGOBI ULONG GOBICMAPI	DMSUIMGetICCID (BYTE stringSize, CHAR *pString)

IMPORTGOBI ULONG GOBICMAPI	DMSUIMGetControlKeyStatus (ULONG id, ULONG pStatus, ULONG pVerifyRetriesLeft, ULONG *pUnblockRetriesLeft)

IMPORTGOBI ULONG GOBICMAPI	DMSUIMSetControlKeyProtection (ULONG id, ULONG status, CHAR pValue, ULONG pVerifyRetriesLeft)

IMPORTGOBI ULONG GOBICMAPI	DMSUIMUnblockControlKey (ULONG id, CHAR pValue, ULONG pUnblockRetriesLeft)

IMPORTGOBI ULONG GOBICMAPI	DMSUIMSetPINProtection (ULONG id, ULONG bEnable, CHAR pValue, ULONG pVerifyRetriesLeft, ULONG *pUnblockRetriesLeft)

IMPORTGOBI ULONG GOBICMAPI	DMSUIMVerifyPIN (ULONG id, CHAR pValue, ULONG pVerifyRetriesLeft, ULONG *pUnblockRetriesLeft)

IMPORTGOBI ULONG GOBICMAPI	DMSUIMUnblockPIN (ULONG id, CHAR pPUKValue, CHAR pNewValue, ULONG pVerifyRetriesLeft, ULONG pUnblockRetriesLeft)

IMPORTGOBI ULONG GOBICMAPI	DMSUIMChangePIN (ULONG id, CHAR pOldValue, CHAR pNewValue, ULONG pVerifyRetriesLeft, ULONG pUnblockRetriesLeft)

IMPORTGOBI ULONG GOBICMAPI	DMSUIMGetPINStatus (ULONG id, ULONG pStatus, ULONG pVerifyRetriesLeft, ULONG *pUnblockRetriesLeft)

IMPORTGOBI ULONG GOBICMAPI	GetHardwareRevision (BYTE stringSize, CHAR *pString)

IMPORTGOBI ULONG GOBICMAPI	GetPRLVersion (WORD *pPRLVersion)

IMPORTGOBI ULONG GOBICMAPI	GetERIFile (ULONG pFileSize, BYTE pFile)

IMPORTGOBI ULONG GOBICMAPI	ActivateAutomatic (CHAR *pActivationCode)

IMPORTGOBI ULONG GOBICMAPI	ActivateManual (CHAR pSPC, WORD sid, CHAR pMDN, CHAR pMIN, ULONG prlSize, BYTE pPRL, CHAR pMNHA, CHAR pMNAAA)

IMPORTGOBI ULONG GOBICMAPI	ResetToFactoryDefaults (CHAR *pSPC)

IMPORTGOBI ULONG GOBICMAPI	GetActivationState (ULONG *pActivationState)

IMPORTGOBI ULONG GOBICMAPI	SetPower (ULONG powerMode)

IMPORTGOBI ULONG GOBICMAPI	GetPower (ULONG *pPowerMode)

IMPORTGOBI ULONG GOBICMAPI	GetOfflineReason (ULONG pReasonMask, ULONG pbPlatform)

IMPORTGOBI ULONG GOBICMAPI	GetNetworkTime (ULONGLONG pTimeCount, ULONG pTimeSource)

IMPORTGOBI ULONG GOBICMAPI	ValidateSPC (CHAR *pSPC)

IMPORTGOBI ULONG GOBICMAPI	GetDeviceCapabilities (ULONG pMaxTXChannelRate, ULONG pMaxRXChannelRate, ULONG pDataServiceCapability, ULONG pSimCapability, ULONG pRadioIfacesSize, BYTE pRadioIfaces)

IMPORTGOBI ULONG GOBICMAPI	GetManufacturer (BYTE stringSize, CHAR *pString)

IMPORTGOBI ULONG GOBICMAPI	GetModelID (BYTE stringSize, CHAR *pString)

IMPORTGOBI ULONG GOBICMAPI	GetFirmwareRevision (BYTE stringSize, CHAR *pString)

IMPORTGOBI ULONG GOBICMAPI	GetFirmwareRevisions (BYTE amssSize, CHAR pAMSSString, BYTE bootSize, CHAR pBootString, BYTE priSize, CHAR *pPRIString)

IMPORTGOBI ULONG GOBICMAPI	GetFirmwareInfo (ULONG pFirmwareID, ULONG pTechnology, ULONG pCarrier, ULONG pRegion, ULONG *pGPSCapability)

IMPORTGOBI ULONG GOBICMAPI	GetVoiceNumber (BYTE voiceNumberSize, CHAR pVoiceNumber, BYTE minSize, CHAR pMIN)

IMPORTGOBI ULONG GOBICMAPI	GetIMSI (BYTE stringSize, CHAR *pString)

IMPORTGOBI ULONG GOBICMAPI	GetSerialNumbers (BYTE esnSize, CHAR pESNString, BYTE imeiSize, CHAR pIMEIString, BYTE meidSize, CHAR *pMEIDString)

IMPORTGOBI ULONG GOBIAPI	GetStoredImages (ULONG pImageListSize, BYTE pImageList)

IMPORTGOBI ULONG GOBIAPI	SetImagesPreference (ULONG imageListSize, BYTE pImageList, ULONG bForceDownload, BYTE modemIndex, ULONG pImageTypesSize, BYTE *pImageTypes)

IMPORTGOBI ULONG GOBIAPI	GetImagesPreference (ULONG pImageListSize, BYTE pImageList)

IMPORTGOBI ULONG GOBIAPI	ResetDevice ()

Detailed Description

Function Documentation

IMPORTGOBI ULONG GOBICMAPI ActivateAutomatic ( CHAR * pActivationCode )

This function requests the device to perform automatic service activation QMI_DMS_ACTIVATE_AUTOMATIC_MSG = 0x0032

Parameters

pActivationCode [ I ] - Activation code (maximum string length of 12)

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI ActivateManual	(	CHAR *	pSPC,
		WORD	sid,
		CHAR *	pMDN,
		CHAR *	pMIN,
		ULONG	prlSize,
		BYTE *	pPRL,
		CHAR *	pMNHA,
		CHAR *	pMNAAA
	)

This function requests the device perform manual service activation, after a successful request the device is then asked to reset QMI_DMS_ACTIVATE_MANUAL_MSG = 0x0033

Parameters

pSPC	[ I ] - NULL terminated string representing the six digit service programming code
sid	[ I ] - System identification number
pMDN	[ I ] - Mobile Directory Number string
pMIN	[ I ] - Mobile Identification Number string
prlSize	[ I ] - (Optional) Size of PRL file array
pPRL	[ I ] - (Optional) The PRL file contents
pMNHA	[ I ] - (Optional) MN-HA string
pMNAAA	[ I ] - (Optional) MN-AAA string

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI DMSUIMChangePIN	(	ULONG	id,
		CHAR *	pOldValue,
		CHAR *	pNewValue,
		ULONG *	pVerifyRetriesLeft,
		ULONG *	pUnblockRetriesLeft
	)

This function change the PIN value QMI_DMS_UIM_CHANGE_PIN_MSG = 0x002A

Parameters

id	[ I ] - PIN ID (1/2)
pOldValue	[ I ] - Old PIN value of the PIN to change
pNewValue	[ I ] - New PIN value of the PIN to change
pVerifyRetriesLeft	[ O ] - Upon operational failure this will indicate the number of retries left, after which the PIN will be blocked (0xFFFFFFFF = unknown)
pUnblockRetriesLeft	[ O ] - Upon operational failure this will indicate the number of unblock retries left, after which the PIN will be permanently blocked, i.e. UIM is unusable (0xFFFFFFFF = unknown)

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI DMSUIMGetControlKeyStatus	(	ULONG	id,
		ULONG *	pStatus,
		ULONG *	pVerifyRetriesLeft,
		ULONG *	pUnblockRetriesLeft
	)

This function returns the status of the specified facility control key QMI_DMS_UIM_GET_CK_STATUS_MSG = 0x0040

Parameters

id	[ I ] - Facility ID
pStatus	[ O ] - Control key status
pVerifyRetriesLeft	[ O ] - The number of retries left, after which the control key will be blocked
pUnblockRetriesLeft	[ O ] - The number of unblock retries left, after which the control key will be permanently blocked

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI DMSUIMGetICCID	(	BYTE	stringSize,
		CHAR *	pString
	)

This function returns the UIM ICCID QMI_DMS_UIM_GET_ICCID_MSG = 0x003C

Parameters

stringSize	[ I ] - The maximum number of characters (including NULL terminator) that the string array can contain
pString	[ O ] - NULL terminated string

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI DMSUIMGetPINStatus	(	ULONG	id,
		ULONG *	pStatus,
		ULONG *	pVerifyRetriesLeft,
		ULONG *	pUnblockRetriesLeft
	)

This function returns the status of the pin QMI_DMS_UIM_GET_PIN_STATUS_MSG = 0x002B

Parameters

id	[ I ] - PIN ID (1/2)
idpStatus	[ O ] - PIN status (0xFFFFFFFF = unknown)
idpVerifyRetriesLeft	[ O ] - The number of retries left, after which the PIN will be blocked (0xFFFFFFFF = unknown)
idpUnblockRetriesLeft	[ O ] - The number of unblock retries left, after which the PIN will be permanently blocked, i.e. UIM is unusable (0xFFFFFFFF = unknown)

IMPORTGOBI ULONG GOBICMAPI DMSUIMSetControlKeyProtection	(	ULONG	id,
		ULONG	status,
		CHAR *	pValue,
		ULONG *	pVerifyRetriesLeft
	)

This function changes the specified facility control key QMI_DMS_UIM_SET_CK_PROTECTION_MSG = 0x0041

Parameters

id	[ I ] - Facility ID
status	[ I ] - Control key status
pValue	[ I ] - Control key de-personalization string
pVerifyRetriesLeft	[ O ] - Upon operational failure this will indicate the number of retries left, after which the control key will be blocked

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI DMSUIMSetPINProtection	(	ULONG	id,
		ULONG	bEnable,
		CHAR *	pValue,
		ULONG *	pVerifyRetriesLeft,
		ULONG *	pUnblockRetriesLeft
	)

This function enables or disables protection of UIM contents by a given PIN QMI_DMS_UIM_SET_PIN_PROTECTION_MSG = 0x0027

Parameters

id	[ I ] - PIN ID (1/2)
bEnable	[ I ] - Enable/disable PIN protection (0 = disable)?
pValue	[ I ] - PIN value of the PIN to be enabled/disabled
pVerifyRetriesLeft	[ O ] - Upon operational failure this will indicate the number of retries left, after which the PIN will be blocked (0xFFFFFFFF = unknown)
pUnblockRetriesLeft	[ O ] - Upon operational failure this will indicate the number of unblock retries left, after which the PIN will be permanently blocked, i.e. UIM is unusable (0xFFFFFFFF = unknown)

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI DMSUIMUnblockControlKey	(	ULONG	id,
		CHAR *	pValue,
		ULONG *	pUnblockRetriesLeft
	)

This function unblocks the specified facility control key QMI_DMS_UIM_UNBLOCK_CK_MSG = 0x0042

Parameters

id	[ I ] - Facility ID
pValue	[ I ] - Control key de-personalization string
pUnblockRetriesLeft	[ O ] - The number of unblock retries left, after which the control key will be permanently blocked

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI DMSUIMUnblockPIN	(	ULONG	id,
		CHAR *	pPUKValue,
		CHAR *	pNewValue,
		ULONG *	pVerifyRetriesLeft,
		ULONG *	pUnblockRetriesLeft
	)

DMSUIMUnblockPIN

This function unblocks a blocked PIN QMI_DMS_UIM_UNBLOCK_PIN_MSG = 0x0029

Parameters

id	[ I ] - PIN ID (1/2)
pPUKValue	[ I ] - PUK value of the PIN to unblock
pNewValue	[ I ] - New PIN value of the PIN to unblock
pVerifyRetriesLeft	[ O ] - Upon operational failure this will indicate the number of retries left, after which the PIN will be blocked (0xFFFFFFFF = unknown)
pUnblockRetriesLeft	[ O ] - Upon operational failure this will indicate the number of unblock retries left, after which the PIN will be permanently blocked, i.e. UIM is unusable (0xFFFFFFFF = unknown)

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI DMSUIMVerifyPIN	(	ULONG	id,
		CHAR *	pValue,
		ULONG *	pVerifyRetriesLeft,
		ULONG *	pUnblockRetriesLeft
	)

This function verifies the PIN before accessing the UIM contents QMI_DMS_UIM_VERIFY_PIN_MSG = 0x0028

Parameters

id	[ I ] - PIN ID (1/2)
pValue	[ I ] - PIN value of the PIN to verify
pVerifyRetriesLeft	[ O ] - Upon operational failure this will indicate the number of retries left, after which the PIN will be blocked (0xFFFFFFFF = unknown)
pUnblockRetriesLeft	[ O ] - Upon operational failure this will indicate the number of unblock retries left, after which the PIN will be permanently blocked, i.e. UIM is unusable (0xFFFFFFFF = unknown)

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetActivationState ( ULONG * pActivationState )

This function returns the device activation state QMI_DMS_GET_ACTIVATION_STATE_MSG = 0x0031

Parameters

pActivationState [ O ] - Service activation state

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetDeviceCapabilities	(	ULONG *	pMaxTXChannelRate,
		ULONG *	pMaxRXChannelRate,
		ULONG *	pDataServiceCapability,
		ULONG *	pSimCapability,
		ULONG *	pRadioIfacesSize,
		BYTE *	pRadioIfaces
	)

This function gets device capabilities QMI_DMS_GET_DEVICE_CAP_MSG = 0x0020

Parameters

pMaxTXChannelRate	[ O ] - Maximum transmission rate (bps)
pMaxRXChannelRate	[ O ] - Maximum reception rate (bps)
pDataServiceCapability	[ O ] - CS/PS data service capability
pSimCapability	[ O ] - Device SIM support
pRadioIfacesSize	[I/O] - Upon input the maximum number of elements that the radio interfaces can contain. Upon successful output the actual number of elements in the radio interface array
pRadioIfaces	[ O ] - The radio interface array

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetERIFile	(	ULONG *	pFileSize,
		BYTE *	pFile
	)

This command returns the ERI file that is stored in EFS on the device QMI_DMS_READ_ERI_FILE_MSG = 0x0039

Parameters

pFileSize	[I/O] - Upon input the maximum number of bytes that the file contents array can contain. Upon successful output the actual number of bytes written to the file contents array
pFile	[ O ] - The file contents

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetFirmwareInfo	(	ULONG *	pFirmwareID,
		ULONG *	pTechnology,
		ULONG *	pCarrier,
		ULONG *	pRegion,
		ULONG *	pGPSCapability
	)

Returns image information obtained from the current device firmware QMI_DMS_GET_DEVICE_REV_ID_MSG = 0x0023

Parameters

pFirmwareID	[ O ] - Firmware ID obtained from the firmware image
pTechnology	[ O ] - Technology (0xFFFFFFFF if unknown)
pCarrier	[ O ] - Carrier (0xFFFFFFFF if unknown)
pRegion	[ O ] - Region (0xFFFFFFFF if unknown)
pGPSCapability	[ O ] - GPS capability (0xFFFFFFFF if unknown)

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetFirmwareRevision	(	BYTE	stringSize,
		CHAR *	pString
	)

This function returns the device firmware revision

Parameters

stringSize	[ I ] - The maximum number of characters (including NULL terminator) that the string array can contain
pString	[ O ] - NULL terminated string

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetFirmwareRevisions	(	BYTE	amssSize,
		CHAR *	pAMSSString,
		BYTE	bootSize,
		CHAR *	pBootString,
		BYTE	priSize,
		CHAR *	pPRIString
	)

This function returns the device firmware (AMSS, boot, and PRI) revisions QMI_DMS_GET_DEVICE_REV_ID_MSG = 0x0023

Parameters

amssSize	[ I ] - The maximum number of characters (including NULL terminator) that the AMSS string array can contain
pAMSSString	[ O ] - NULL terminated AMSS revision string
bootSize	[ I ] - The maximum number of characters (including NULL terminator) that the boot string array can contain
pBootString	[ O ] - NULL terminated boot code revision string
priSize	[ I ] - The maximum number of characters (including NULL terminator) that the PRI string array can contain
pPRIString	[ O ] - NULL terminated PRI revision string

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetHardwareRevision	(	BYTE	stringSize,
		CHAR *	pString
	)

This function returns the device hardware revision QMI_DMS_GET_DEVICE_HARDWARE_REV_MSG = 0x002C;

Parameters

stringSize	[ I ] - The maximum number of characters (including NULL terminator) that the string array can contain
pString	[ O ] - NULL terminated string

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBIAPI GetImagesPreference	(	ULONG *	pImageListSize,
		BYTE *	pImageList
	)

This function gets the current images preference QMI_DMS_GET_FIRMWARE_PREF_MSG = 0x0047;

Parameters

pCallbackpImageListSize	[I/O] - Upon input the size in BYTEs of the image list array. Upon success the actual number of BYTEs copied to the image list array
pImageList	[ O ] - The image info list array

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetIMSI	(	BYTE	stringSize,
		CHAR *	pString
	)

This function returns the device IMSI

Parameters

stringSize	[ I ] - The maximum number of characters (including NULL terminator) that the string array can contain
pString	[ O ] - NULL terminated string

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetManufacturer	(	BYTE	stringSize,
		CHAR *	pString
	)

This function returns the device manufacturer name QMI_DMS_GET_DEVICE_MFR_MSG = 0x0021

Parameters

stringSize	[ I ] - The maximum number of characters (including NULL terminator) that the string array can contain
pString	[ O ] - NULL terminated string

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetModelID	(	BYTE	stringSize,
		CHAR *	pString
	)

This function returns the device model ID QMI_DMS_GET_DEVICE_MODEL_ID_MSG = 0x0022

Parameters

stringSize	[ I ] - The maximum number of characters (including NULL terminator) that the string array can contain
pString	[ O ] - NULL terminated string

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetNetworkTime	(	ULONGLONG *	pTimeCount,
		ULONG *	pTimeSource
	)

This function returns the current time of the device QMI_DMS_VALIDATE_SERVICE_PROGRAMMING_CODE_MSG = 0x003B

Parameters

pTimeCount	[ O ] - Count of 1.25ms that have elapsed from the start of GPS time (Jan 6, 1980)
pTimeSource	[ O ] - Source of the timestamp

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetOfflineReason	(	ULONG *	pReasonMask,
		ULONG *	pbPlatform
	)

This function returns the reason why the operating mode of the device is currently offline QMI_DMS_GET_OPERATING_MODE_MSG = 0x002D

Parameters

pReasonMask	[ O ] - Bitmask of offline reasons
pbPlatform	[ O ] - Offline due to being platform retricted?

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetPower ( ULONG * pPowerMode )

This function returns the operating mode of the device QMI_DMS_GET_OPERATING_MODE_MSG = 0x002D

Parameters

pPowerMode [ O ] - Current operating mode

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetPRLVersion ( WORD * pPRLVersion )

This function returns the version of the active Preferred Roaming List (PRL) in use by the device QMI_DMS_GET_PRL_VER_MSG = 0x0030

Parameters

pPRLVersion [ O ] - The PRL version number

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetSerialNumbers	(	BYTE	esnSize,
		CHAR *	pESNString,
		BYTE	imeiSize,
		CHAR *	pIMEIString,
		BYTE	meidSize,
		CHAR *	pMEIDString
	)

This command returns all serial numbers assigned to the device QMI_DMS_GET_DEVICE_SERIAL_NUMBERS_MSG = 0x0025

Parameters

esnSize	[ I ] - The maximum number of characters (including NULL terminator) that the ESN array can contain
pESNString	[ O ] - ESN string (empty string returned when ESN is not supported/programmed)
imeiSize	[ I ] - The maximum number of characters (including NULL terminator) that the IMEI array can contain
pIMEIString	[ O ] - IMEI string (empty string returned when IMEI is not supported/programmed)
meidSize	[ I ] - The maximum number of characters (including NULL terminator) that the MEID array can contain
pMEIDString	[ O ] - MEID string (empty string returned when MEID is not supported/programmed)

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBIAPI GetStoredImages	(	ULONG *	pImageListSize,
		BYTE *	pImageList
	)

This function gets the list of images stored on the device QMI_DMS_LIST_STORED_IMAGES_MSG = 0x0049

Parameters

pImageListSize	[I/O] - Upon input the size in BYTEs of the image list array. Upon success the actual number of BYTEs copied to the image list array
pImageList	[ O ] - The image info list array

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI GetVoiceNumber	(	BYTE	voiceNumberSize,
		CHAR *	pVoiceNumber,
		BYTE	minSize,
		CHAR *	pMIN
	)

This function returns the voice number in use by the device QMI_DMS_GET_MSISDN_MSG = 0x0024

Parameters

voiceNumberSize	[ I ] - The maximum number of characters (including NULL terminator) that the voice number array can contain
pVoiceNumber	[ O ] - Voice number (MDN or ISDN) string
minSize	[ I ] - The maximum number of characters (including NULL terminator) that the MIN array can contain
pMIN	[ O ] - MIN string (empty string returned when MIN is not supported/programmed)

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBIAPI ResetDevice ( )

This function resets the device

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI ResetToFactoryDefaults ( CHAR * pSPC )

This function requests the device reset configuration to factory defaults, after a successful request the device is then asked to reset QMI_DMS_RESTORE_FACTORY_DEFAULTS_MSG = 0x003A

Parameters

pSPC	[ I ] - NULL terminated string representing the six digit service programming code

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI SetActivationStatusCallback ( tFNActivationStatus pCallback )

This function enables/disables the activation status callback function with QMI_DMS_SET_EVENT_REPORT 0x0001 TLV 0x013

Parameters

pCallback [ I ] - Callback function (0 = disable)

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBIAPI SetImagesPreference	(	ULONG	imageListSize,
		BYTE *	pImageList,
		ULONG	bForceDownload,
		BYTE	modemIndex,
		ULONG *	pImageTypesSize,
		BYTE *	pImageTypes
	)

This function sets the current images preference QMI_DMS_SET_FIRMWARE_PREF_MSG = 0x0048

Parameters

imageListSize	[ I ] - The size in BYTEs of the image list array
pImageList	[ I ] - The image list array
bForceDownload	[ I ] - Force device to download images from host?
modemIndex	[ I ] - Desired storage index for downloaded modem image
pImageTypesSize	[I/O] - Upon input the maximum number of elements that the download image types array can contain. Upon successful output the actual number of elements in the download image types array
pImageTypes	[ O ] - The download image types array

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI SetPower ( ULONG powerMode )

This function sets the operating mode of the device QMI_DMS_SET_OPERATING_MODE_MSG = 0x002E

Parameters

powerMode [ I ] - Selected operating mode

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI SetPowerCallback ( tFNPower pCallback )

Enable/disable power operating mode callback function QMI_DMS_SET_EVENT_REPORT_REQ 0x0001 TLV 0x10

Parameters

pCallback [ I ] - Callback function

Returns: See GobiErrorCodes.h

IMPORTGOBI ULONG GOBICMAPI ValidateSPC ( CHAR * pSPC )

This function validates the service programming code QMI_DMS_VALIDATE_SERVICE_PROGRAMMING_CODE_MSG = 0x003B

pSPC [ I ] - Six digit service programming code

Returns: See GobiErrorCodes.h

Functions

Detailed Description

Function Documentation